Industrial Sewage Water Quality Tester Water Quality Test Turbidity and Total Suspended Matter Tester

Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test MeterDescription of Suspended Solids (Sludge Concentration) SensorThe DG-ZDYG-2087 suspended solids sensor is based on the infrared absorption scattered light method and combined with the application of ISO7027 met

Featured Products

Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter

Description of Suspended Solids (Sludge Concentration) Sensor

The DG-ZDYG-2087 suspended solids sensor is based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple.

Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter

TECHNICAL SPECIFICATIONS of Sensor

SpecificationsDetails of sensor
SizeDiameter 60mm* Length 256mm
Main MaterialsMain Body:SUS316L (Ordinary Version),Titanium Alloy (Seawater Version)
Upper and Lower Cover:PVC;Cable: PVC
Waterproof RateIP68/NEMA6P
Measurement Range0.01-20000 mg/L,0.01-45000 mg/L ,0.01-120000 mg/L
Indication ResolutionLess than ± 5% of the measured value (depending on sludge homogeneity)
Pressure Range≤0.4Mpa
Flow velocity≤2.5m/s,8.2ft/s
Storage Temperature-15~65ºC
Environment Temperature0~45ºC
CalibrationSample Calibration, Slope Calibration
Cable LengthStandard 10-Meter Cable, Max Length: 100 Meters
Warranty Period1 Year
High Voltage BaffleAviation Connector, Cable Connector

Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test MeterWater Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test MeterWater Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test MeterWater Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter

SUSPENDED SOLIDS METER

The suspended solid meter can be used to display data measured by the sensor, so the user can get the 4-20mA analog output by transmitter's interface configuration and calibration. And it can make relay control, digital communications, and other functions a reality.

The product is widely used in sewage plant, water plant, water station, surface water, farming, industry and other fields. The transmitter diagram is shown as figure 1.
Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter

TECHNICAL SPECIFICATIONS of Controller
SpecificationDetails
Size145*125*162mm  L*W*H
Material of outside shellLower casing:Aluminum with powder covering
Cover:PA66+GF25+FR
Waterproof RateIP65/NEMA4X
Storage Temperature-20 to 70ºC
Operation Temperature-15 to 60ºC
Power SupplyAC:AC220V, 50HZ, 5W
DC:DC24V
OutputTwo-way analog output 4-20mA, response parameters and corresponding scope can be programmed;
Note: the maximum load is 500 ohms
RelayThree-way relay can be set up, and response parameters and response values can be programmed
Display Output128 * 64 dot matrix LCD with LED backlight, which can be operated under the direct sunlight
Digital CommunicationMODBUS RS485 communication function, which can transmit real-time measurements
Warranty Period1 year
Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter
MAIN FEATURES
  1. Relay, output and the signal:  The transmitter is equipped with three configurable relay switches and two-way analog output.
  2. Sensor and the sensor moduleThe transmitter is a single-parameters one, can contain one sensor.
  3. Transmitter shellTransmitter shell is of IP65 protection class. For outdoor use, it's strongly recommended to take protective measures to prevent environmental damage.


WHY CHOOSE US:

Probest is a professional ISO9001 certificated manufacturer with many patents specializing in researching, developing, producing of water analysis instruments, including portable water analyzer, multi-parameter water quality analyzer, data acquisition and transmission terminal. The product can be applied to the fields of water quality monitoring of drinking water, waste water, surface water, aquaculture water, industrial process water, etc.
Probest is a reliable company including 30+ researcher, focusing on the development of sensor technology to make water analysis faster, simpler, greener and better. 
Quality is our core advantages, providing stable and reliable water quality analysis.

 

Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test MeterWater Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter
Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter
Our service:
Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter

Water Quality Tester for Industrial Sewage Water Test Turbidity and Total Suspended Solids Test Meter

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours