Turbidity Analyzer (A-F330)

Turbidity analyserMulti-beam of RD measurement technology to compensate for the impace of ambient light, dirt and component aging.Multi-point calibration to ensure accuracy within the measuring range.A variety of variables output, intelligent control systems such as current and relays.The sensor can be configured to air purge de

Featured Products

Turbidity analyser
Multi-beam of RD measurement technology to compensate for the impace of ambient light, dirt and component aging.
Multi-point calibration to ensure accuracy within the measuring range.
A variety of variables output, intelligent control systems such as current and relays.
The sensor can be configured to air purge device, controlled by the transmitter to self-clean.
A variety of installation methods such as immersion, pipe plug-in etc...
Water treatment plant: Sedimentation tanks
Paper mill: Pulp concentration
Coal washing plant: Sedimentation tanks
Electricity: Mortar sedimentation tanks etc.
Sewage treatment plant: Inlet and outlet, aeration tanks, return sludge, primary sedimentation tank, secondary sedimentation tank, concentration tank, sludge dewatering etc.
ItemTurbidity Analser
  TransmitterTechnical Parameters:
Measuring Range: Activated sludge, 0 ~30g/L 
Silica, 0~100 g/L
Display: LCD
Units of Measurement: g/L and mg/L(Optional)
Resolution: 0.01%
Accuracy: +-1.0%FS
Repeatability: +-1.0%
Power: < =15 W
Analog Output: 4~20mA, load 750Ω
Switch Output: 2 relays, capacity 220VAC/2A
Power Supply: AC220V+-10%
 
  Sensor
 
Sensor
Material: 316stainless steel
Cable: shielded cable
Installation: Immersion, pipe plug-in
Process Connection: ZG1
Dimensions: Φ 50*96mm
Medium Pressure: < =3 bar
Signal Cable: 10M(standard configuration)Can be extended
Degree of Protection: IP68
Operating Temperature: Sensor: -20~60C
 


Turbidity Analyser (A-F330)

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours