pH8022 online pure water pH electrode, sensor, probe

PH8012 Industrial Composite Sewage PH ElectrodeBasic Principle of pH ElectrodeIn PH measurement, the used electrode is also known as the primary battery. The primary battery is a system, whose role is to transfer chemical energy into electrical energy. The voltage of the battery is called the electromotive force (EMF). This

Featured Products

pH8022 Inline Pure Water pH Electrode, Sensor, Probe
PH8012 Industrial Composite Sewage PH Electrode

Basic Principle of pH Electrode

In PH measurement, the used electrode is also known as the primary battery. The primary battery is a system, whose role is to transfer chemical energy into electrical energy. The voltage of the battery is called the electromotive force (EMF). This electromotive force (EMF) is composed of two half-batteries. One half-battery is called the measuring electrode, and its potential is related to the specific ion activity; the other half-battery is the reference battery, often called the reference electrode, which is generally interlinked with the measurement solution, and connected to the measuring instrument.

 
Model No.: PH8012
Measuring range: 0-14pH
Temperature range:0-60ºC
Compressive strength:0.3MPa
Slope: ≥96%
Zero point potential: E0=7PH±0.3
Internal impedance: 150-250 MΩ (25ºC)
Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding)
Installation size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
Application: Applicable to various industrial sewages, environmental protection and water treatment.  



Features of PH Electrode
It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy
maintenance.
 Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment
 It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is
no need of the jacket, thus saving the installation cost.
 The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20
meters free of interference.
 There is no need for additional dielectric and there is a little amount of maintenance.
 High measurement accuracy, fast responsing and good repeatability.
 Reference electrode with silver ions Ag/AgCL
 Proper operation shall make service life longer.
 It can be installed in the reaction tank or pipe laterally or vertically.
 The electrode can be replaced by a similar electrode made by any other country.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours